| 
Oxygen Sensors R-22D OXYGEN SENSOR
A new sensor should output approximately 9 to 13 millivolts in air and 45 to 55 millivolts in 100% oxygen.
Picture from SWM
Tip: Sensor life can be significantly shortened by excessive exposure to heat, so keep your rebreather out of the sun whenever possible
If you look at the sensors there is a code and if it says F6 the F means June as F is the sixth letter of the alphabet and the sixth month of the year and 6 is for the year 2006.
Loop cleaner
Buddy clean as recommended by APD for the inspiration classic and the Evoloution.
Virkon RelyOn as recommended by Canadian Forces diving community
http://www.diveriteexpress.com/rebreathers/relyon.shtml
Manual Inflation Valves
The Allen key to remove the manual inflation valves is a 13mm and the thread is anticlockwise.
Inspiration Hose tool
£20 on Divelife website and £18.89 for a really good one at Narked at 90
How to change the O-rings here
http://finstrokes.com/scubaforum/viewtopic.php?f=36&t=3095
Inspiration flat packing DT type box
flat-packing rebreather unit makes transporting your box simple. Weighing around 5kg, the stripped down box will fit in a bag or rucksack small enough to take as hand luggage. Just hire the cylinders at your dive destination. Diving products
Adv info.
The gas supply hose connects with a 3/8" UNF thread. Its an upstream valve that can be used with 1st stage valves delivering 7-11 Bar.
Service Manual T40 & 50 first stage
1st Stage interstage pressures.
Dill 9.2 - 9.5 bar
O2 7.5 bar
Batterys
The code for the battery is CRP2P Good places to get them are 7dayshop.com
Handset covers & Hose protectors
How to shorten an Apex hose
http://finstrokes.com/scubaforum/viewtopic.php?f=61&t=2690
Where to get new ends and hoses Narked@90
http://narkedat90.com/shop/product/quick_disconnect_hose_fitting/
http://narkedat90.com/shop/product/3_8_unf_reusable_fitting/